Part Details JP0218

JP0218 - JBP Mild Build Crate Engine [2.8L/3.1L]
Price: [$4840 (US$4598.00)]

Our mild build crate engine just got better!! We are throwing in more machining, better parts all while keeping the same price!!

- JBP Custom Grind Camshaft
[Profile 1 - Stock Idle, Excellent Drivability, Computer Friendly]
[Dur: 278/288 Clift: 280/295 Vlift: 420/443]

[Profile 2 - Mild Idle, Excellent Drivablility, Computer Friendly]
[Dur: 288/298 Clift: 280/295 Vlift: 442/469]

[Profile 3 - Rough Idle, Moderate Drivability, Computer Unfriendly]
[Race Only]

- Sealed Power Chrome Molley Piston Rings
- Sealed Power 11.5:1 Hypereutectic Pistons w/Coated Skirts
- CompCam Hi-Revolution Lifters
- Cloyes Double Roller Timing Chain & Gear
- JBP Custom Timing Chain Cover spacer
- 286 Cast Nodular Iron Heavy Duty Crankshaft
- JBP Sportsman Rods
- Clevitte Main Bearings
- Clevitte Rod Bearings
- Clevite Cam Bearings
- Strengthened Pushrods
- Hi-Rev. Dual Coil Valve Springs
- HV Oil Pump
- Stock Retainers and Locks
- Frost Plugs Installed (No Block Heater)
- Oil Gallery plugs installed
- Felpro head gasket set
- Felpro front/rear main seal
- Felpro engine conversion set
- Full Engine writeup and history

Machining:

Using our in-house machine shop and fully inspected and tested cores, your block will receive maticulate attention to detail from the pros at JBP. We are the godfather of the 60DEGV6!!

- Hot Tank, Typhoon, Degrease all parts
- Block Bored, Pistons to match [.020, .030 or .040"]
- Cylinder Hone, Chamfer bores
- Align Hone
- Blast and degrease ALL components
- 3 Angle Valve Job
- Cylinder heads resurfaced
- Clearances checked
- Deck Resurface
- Fully assembled and checked

Parts can be added or removed to customize the motor to your specs!

Specifications

~11.5:1 Compression
91 Octane Gas Only
Yields NA ~180HP at the crank
Advancing Timing via ECU/Memcal program is applicable
Handles 50-Shot Nitrous Oxide
Not designed for boost delivered
Max RPM 6000RPM

Your engine comes with a full 30 day warranty from the date of shipping.

Now you can have a fresh JbodyPerformance built quality crate engine at an absolutely respectable price. Don't delay, start that engine build today!

Have you considered adding our 60DEG cylinder head package to this engine? If so, receive it for 30% off coupled with this engine!!

Strokes a 2.8L into a 3.1L and leaves a 3.1L at the same stroke