Part Details JP0219

JP0219 - JBP Forged Build Crate Engine [2.8L/3.1L]
Price: [$7524 (US$7147.80)]

Our forged build crate engine just got better!! We are throwing in more machining, better parts all while keeping the same price!!

- JBP Custom Grind Camshaft
[Profile 1 - Stock Idle, Excellent Drivability, Computer Friendly]
[Dur: 278/288 Clift: 280/295 Vlift: 420/443]

[Profile 2 - Mild Idle, Excellent Drivablility, Computer Friendly]
[Dur: 288/298 Clift: 280/295 Vlift: 442/469]

[Profile 3 - Rough Idle, Moderate Drivability, Computer Unfriendly]
[Race Only]

[Boost Cam - Excellent Idle, Moderate Drivability, Computer friendly]
[Race Only]

- JBP/Wiseco XC/XE Piston Rings
- JBP/Wiseco Forged Aluminum Pistons
Custom Pin Diameter
Spirolox
Valve Reliefs (if needed)
- CompCam Hi-Revolution Lifters
- Cloyes Double Roller Timing Chain & Gear
- JBP Custom Timing Chain Cover spacer
- 286 Cast Nodular Iron Crankshaft
Upgrade to forged crankshaft (10% off)
- JBP Sportsman Rods
Upgrade to cross-beam rods (30% off)
- Clevitte Main Bearings
- Clevitte Rod Bearings
- Clevite Cam Bearings
- Strengthened Pushrods
Upgrade to chromolly steel (20% off)
- Hi-Rev. Dual Coil Valve Springs
Upgrade to chrome silicon metal (20% off)
- Stock Retainers and Locks
Upgrade to chromolly steel (15% off)
- HV Oil Pump
- ARP Head Studs
- Frost Plugs Installed (No Block Heater)
- Oil Gallery plugs installed
- Felpro head gasket set
Upgrade to copper head gasket (+$200)
- Felpro front/rear main seal
- Felpro engine conversion set
- Full Engine writeup and history

Machining:

Using our in-house machine shop and fully inspected and tested cores, your block will receive maticulate attention to detail from the pros at JBP. We are the godfather of the 60DEGV6!!

- Hot Tank, Typhoon, Degrease all parts
- Block Bored, Pistons to match [.020, .030 or .040"]
- Cylinder Hone, Chamfer bores
- Align Hone
- Blast and degrease ALL components
- 3 Angle Valve Job
- Cylinder heads resurfaced
- Clearances checked
- Deck Resurface
- Block O-Ring'd (if copper head gasket)
- Head receiver groove (if copper head gasket)
- Fully assembled and checked

Parts can be added or removed to customize the motor to your specs!

Specifications:

Custom Compression
N/A Octane Gas Only
Yields NA ~195HP at the crank (highest compression)
Advancing Timing via ECU/Memcal program is applicable
Handles 150-Shot Nitrous Oxide
Designed for boost pending compression ratio
Max RPM 6000RPM

Your engine comes with a full 30 day warranty from the date of shipping.

Now you can have a fresh JbodyPerformance built quality crate engine at an absolutely respectable price. Don't delay, start that engine build today!

Offset grinding and custom timing can be performed for the optional JBP Forged crankshaft for an additional fee.

Have you considered adding our 60DEG cylinder head package to this engine? If so, receive it for 30% off coupled with this engine!!

Strokes a 2.8L into a 3.1L and leaves a 3.1L at the same stroke

Purchase all applicable core charges to speed up order